Laminate Flooring Installation is the preferred choice of many homeowners who are looking to replace their hardwood floor. Laminate floors are comprised of multi-layered synthetic materials that closely resemble real wood in appearance and feel. Laminate is very easy to install, requiring only basic carpentry skills. Laminate floors are easy to clean, often exhibiting no visible dirt or streaks, making it a preferred choice for kitchens and bathrooms.
Prepare Your Floor Plan:
Before you begin installing laminate flooring installation, you need to prepare your floor plan. Lay out the planks on a large plywood board, using recommended hardware such as Tapestry Hardware, or any other brand name you prefer. It is important to anchor the boards to the floor with double-sided tape, as this will ensure the planks do not warp or shift while they are under heavy weight.
The planks can be laid on a surface as large as your dining room table, however most experts recommend that their laminate flooring installation is on a smaller scale, so the planks are not too close together.
Installation Should be Done In Sections:
When installing laminate flooring installation, it is important to remember that installation should be done in sections. Do not start a section, until all of the previous planks have been installed. Begin by installing the planks in single file, then as sections become finished, continue to cross them over to complete the last few steps.
Always walk with care when installing laminate flooring installation, so as not to damage any boards, or bend the edges of any rails or subfloor.
Make An Underlayment:
After each section of laminate flooring installation has been completed, carefully inspect the subfloor for any areas that may require repairs. This is particularly important with an underlayment, as this type of underlayment will often need to be replaced when there are problems. If you are unsure about whether you may need to replace your underlayment, consult an expert at your local floor covering store before you begin the installation process.
If you decide to have professional help with the laminate flooring installation, you may be able to get a reduced price as the store will save time by having the installation done by someone who knows what they are doing.
Planks Distancing:
Once you have installed the planks in their proper spaces, use a utility knife to score the planks as you go. When installing laminate floors, it is important to score the planks at exactly the right distance from each other, as this will prevent premature splitting of the wood when the planks are installed. Score the planks just slightly wider than the width of one planer bar, as this will prevent the planks from splitting when they are slid along the edges of the taping. You should also score the planks just slightly bigger than the depth of one creature hole, as this will prevent any of the laminate flooring installation material from peaking through.
Wax or Sealant :
When installing laminate flooring installation may need to be followed up with wax or sealant. These products will protect the floor and make it last longer, especially in high traffic areas. When you wax the floor, you will want to do so a day or two before you install the planks. The wax will prevent any moisture from building up between the planks, which can weaken the boards over time. Once the wax has dried, you may need to reapply it to ensure that the floor is protected.
https://citylocal101.com/cl01708-kitchen-remodeling-services-north-highlands-ca
https://citylocal101.com/cl01708-tile-installation-services-north-highlands-ca
Comments
Post a Comment