The fence is a wonderful addition to your garden, it not only marks the area but turns your garden into a magical place. Installation of a fence might not be difficult if you do it the correct way, otherwise, the whole fence line would be disoriented. The quality of work depends on several things including the material of the fence. People often prefer the wooden fence but there are aluminum solutions as well. Follow the steps below to successfully install your fence.
Conduct a smart survey and mark the area
A survey is extremely important before you start digging the
holes in the ground. The Fencing demands stable ground for
installation. Identify the place where you want to install the fence and mark
it. take the necessary measurements so you can arrange the posts for the fence.
It is extremely important to mark the area correctly because once the posts are
installed it would be difficult to remove them.
Choose the best posts and treat them
If you want your fence to last longer, then you must choose
the posts adequately. Visit the market yourself and select the straight posts.
It would be great if they are partially treated with the paint. According to
the fence company in Alpharetta GA it is extremely important to treat the posts
to avoid humidity and better drainage. You should slice the post at the bottom
at 45° and paint the part that has to stay in the ground.
https://www.mrjourno.com/home-and-decor/should-you-have-concrete-for-your-sidewalk-1622620890.html
Dig holes to fix the posts
Digging the holes seems like an easy job but it will be
quite challenging because you need to dig them precisely. The precision allows
you to fix the posts quickly in the ground. The hole can be a minimum of six
inches depending on the height and weight of the post. The depth of the hole
must be increased if the size of the pot increases. Make sure to leave
someplace around the post to add fillings.
Fill up the aggregate and damp it
The effective way to install a post is to ensure good
drainage, and this can be done only by adding aggregate at the bottom of the
post. This way the post doesn’t come in contact with the ground and the
humidity can’t enter the post. You should damp the aggregate in the hole before
placing the post to enhance the stability of the post.
Use concrete for stability
Once you are done with the aggregate, it is time to add concrete
to the hole around the post. It might need support in the beginning but as the
concrete stabilizes it becomes independent. Make sure to pack it well in the
hole. Afterward, you can also add synthetic acrylic paste to seal up the
remaining holes in the concrete.
Installing a post may seem easy, but without the right tools and motivation, you can’t achieve what you desire. To sort out any complex situation remember to contact the experts. They can do it a lot faster than you can imagine. When the installation is finished, it would be great if you look after it continuously.
Comments
Post a Comment